|Home||» Products||» Chemical Reaction Engineering Lab||» Isothermal (C.S.T.R)|
- Minimum Order Quantity
- Unit of Measure
Ã¢â¬ÅIsothermal C.S.T.R. ApparatusÃ¢â¬
In an ideal CSTR (i.e. an ideal steady state flow reactor) the contents in reactor are well mixed and have uniform composition throughout. Thus the exit stream has the same composition as the fluid within the reactor. This type of reactor is known as mixed flow reactor. This set-up is used to study a non-catalytic homogeneous second order liquid phase reaction under isothermal condition. The set up consists of two feed tanks through which two reactants are fed to the reactor. Rotameters are provided to measure the individual flow of Chemicals. The flow rate can be adjusted by operating the needle valves provided on respective Rotameter. The compressed air is used for circulation of feed. The CSTR is fitted with stirrer for proper mixing. From top outlet of it samples are collected for analysis. Constant temperature water bath arrangement is provided to conduct the experiment at various temperatures. Pressure Regulator, Pressure Gauge and Safety Valve are fitted in the compressed air line.
ÃË Specification Reaction study in Isothermal CSTR.
ÃË To determine the Reaction Rate Constant and effect of temperature on it.
Required for Operation:
ÃË Compressed Air Supply at 2 Bar, 0.5 CFM.
ÃË Electricity Supply: 1 Phase, 220 V AC, 1.5 kW.
ÃË Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted.
ÃË Reactor: Material Stainless Steel, Capacity 2 Ltrs. (Approx).
ÃË Water Bath: Material Stainless Steel, Double wall, insulated with Ceramic Wool
ÃË Heater: Nichrome wire Heater.
ÃË Stirrer (2Nos.): Stainless Steel Impeller and shaft coupled with FHP motor. (One each for Water Bath and Reactor).
ÃË Feed Tank (2Nos.): Material Stainless Steel, Capacity - 20 Ltrs.
ÃË Feed Circulation: By compressed air.
ÃË Flow Measurement: Rotameter 2 Nos. one each for Reactants.
ÃË Piping: Stainless Steel and PVC.
ÃË Pressure Regulator: 0-2 Kg/cm2.
ÃË Pressure Gauge: Bourdon type 0-2 Kg/cm2.
ÃË Stop Watch: Electronic.
ÃË Standard make On/Off switch, Mains Indicator etc.
ÃË Digital, Temp. Controller: 0-199.9Ã°C (For Hot Water Bath).
ÃË Temp. Sensor: RTD PT-100 type.
Scope of Delivery:
ÃË 1 Self-contained Ã¢â¬ÅISOTHERMAL C.S.T.R.Ã¢â¬ Apparatus
ÃË 1 Instruction Manual consisting of experimental procedures, block diagram etc.
- FOB Port
- Payment Terms
- Cash Advance (CA), Cash in Advance (CID)
- Supply Ability
- 10 Per Month
- Delivery Time
- 30 Days
- Sample Available
- Sample Policy
- Sample costs shipping and taxes has to be paid by the buyer
- Packaging Details
- Material will be packed in safe carton
- Main Domestic Market
- All India
- ISO 9001 : 2015 Certified