|Home||» Products||» Mechanical Operation Lab Equipment||» Froth Floatation|
- Minimum Order Quantity
- Unit of Measure
Mixed liberated particles can be separated from each other by floatation if there is sufficient difference in their wet ability. The floatation process operates by preparing a water suspension of a mixture of relatively finely sized solids. This is usually done in an agitated chamber open at the top. Fine bubbles of air are then dispersed through the agitated suspension to form a froth that rises to the top of the chamber. Particles that are radically wetted by water (hydrophilic) tend to remain in the water suspension. Those particles that are not easily wetted (hydrophobic) tend to be collected at the air bubble-water interface and rise to the surface attached to air bubbles. Thus differences in the surface chemical properties of the solids are the basis for separation. The set up consists of a agitated chamber open at the top. In the chamber, an impeller coupled to a shaft is fixed in a stationary diffuser. Low-pressure air is allowed to enter in the stationary diffuser through the air passage provided with the agitator. The collector coated mineral particles adhere to the rising bubbles and are carried to the top of the cell to be removed in the froth product.
ÃÆÃÅ To study the performance of Froth Flotation Cell.
ÃÆÃÅ To find % recovery of mineral in froth from a standard mixture.
ÃÆÃÅ Material for Feed, Frothing agents and collectors.
ÃÆÃÅ Water Supply and Drain.
ÃÆÃÅ Compressed Air Supply 1 CMH at 2kg/cm2.
ÃÆÃÅ Electric Supply: Single phase, 220 V AC, 0.5 kW.
ÃÆÃÅ Floor Area 1.5 m x 1 m.
ÃÆÃÅ Flotation Chamber: Material Stainless Steel, Compatible capacity.
ÃÆÃÅ Agitator : Stainless Steel Impeller with Stainless Steel shaft coupled to FHP motor.
ÃÆÃÅ Diffuser: Material Stainless Steel holding the impeller.
ÃÆÃÅ Froth Collecting Tank: Material Stainless Steel, Capacity 20 Ltrs.
ÃÆÃÅ Control panel Comprises of:Standard make On/Off switch, Mains Indicator etc.
ÃÆÃÅ Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus
ÃÆÃÅ A good quality painted rigid MS Structure is provided to support all the parts.
ÃÆÃÅ Standard make on/off switch, Mains Indicator etc.
Scope of Delivery:
ÃÆÃÅ 1 Self-contained FROTH FLOATATION Apparatus
ÃÆÃÅ 1 Instruction Manual consisting of experimental procedures, block diagram etc.
- FOB Port
- Payment Terms
- Cash Advance (CA), Cash in Advance (CID)
- Supply Ability
- 10 Per Month
- Delivery Time
- 30 Days
- Sample Available
- Sample Policy
- Sample costs shipping and taxes has to be paid by the buyer
- Packaging Details
- Material will be packed in safe carton
- Main Domestic Market
- All India
- ISO 9001 : 2015 Certified