|Home||» Products||» Chemical Reaction Engineering Lab||» Emulsion Polymerization Set Up|
Emulsion Polymerization Set Up
- Minimum Order Quantity
- Unit of Measure
Emulsion Polymerization Set-up Apparatus
The set-up is used to carry out the emulsion polymerization involving polymerization of a unsaturated monomer like Styrene. Emulsion is of the type: oil in water, monomer is oil soluble & the initiator is water-soluble & an emulsifier is used to create a stable emulsion. Apparatus can be used to generate the kinetic data for emulsion polymerization under various operating conditions like temperature, emulsifier concentration etc. Polymerization is carried out under the atmosphere of air free nitrogen. The set-up consists of jacketed type SS reactor fitted with a variable speed agitator & baffles. Hot water from a digitally controlled water bath is circulated in the jacket using a pump. Metered quantity of nitrogen gas from a cylinder passes through a de-oxygenation column & allowed to enter in the reactor. Air has to be evacuated using a vacuum pump to create vacuum up to 30mm of Hg before passing the nitrogen supply. Initiator from reservoir is supplied to the reactor under pressure. Set-up is complete & self-contained with sampling ports.
ÃË The parameter studies are conducted involving studies of :
ÃË Effect of RPM on conversion.
ÃË Effect of Initiator concentration.
ÃË Effect of monomer concentration
ÃË Effect of emulsifier concentration.
Required for Operation:
ÃË Water supply and drain.
ÃË Electricity-1.5kw, Single.
ÃË Vacuum Pump.
ÃË High purity N2 gas.
ÃË Instruments, Laboratory wares and Chemicals required for analysis as per the system adopted.
ÃË Reactor : Material Stainless Steel, Total volume of Reactor 1.5 - 2 Ltrs. (approx.)
ÃË Agitator : Material Stainless Steel Impeller (2 paddles) fitted with Stainless
ÃË Steel Shaft coupled to DC Motor with Thyristor controlled DC Drive.
ÃË Flow Measurement : Rota meter for Nitrogen Gas
ÃË De-Oxygenation Column : Compatible capacity
ÃË Hot Water Tank: Material Stainless Steel, Double Wall, insulated with ceramic wool.
ÃË Hot water circulation: Magnetic Pump made of Polypropylene. Maximum working temperature is 80Ã°C.
ÃË Heaters: Nichrome wire heater.
ÃË Initiator Reservoir : Capacity 25-50
ÃË Temperature sensors : RTD PT-100 type 5 Nos
ÃË The whole set-up is ingeniously designed and schematically arranged on a powder-coated rigid structure.
ÃË Digital Temperature Controller : 0199.9Ã°C RTD PT-100 type (For hot water tank)
ÃË Digital temperature indicator : 0-199.90C with multi-channel switch
ÃË RPM Indicator: Digital, Non-contact type with standard make on/off switch, Mains Indicator etc.
Scope of Delivery:
ÃË 1 Self-contained Emulsion Polymerization Set-up Apparatus Apparatus
ÃË 1 Instruction Manual consisting of experimental procedures, block diagram etc.
- FOB Port
- Payment Terms
- Cash Advance (CA), Cash in Advance (CID)
- Supply Ability
- 10 Per Month
- Delivery Time
- 30 Days
- Sample Available
- Sample Policy
- Sample costs shipping and taxes has to be paid by the buyer
- Packaging Details
- Material will be packed in safe carton
- Main Domestic Market
- All India
- ISO 9001 : 2015 Certified