|Home||» Products||» Chemical Reaction Engineering Lab||» Condensation Polymerization Set-Up|
Condensation Polymerization Set-Up
- Minimum Order Quantity
- Unit of Measure
Condensation POLYMERISATION SET UP Apparatus
Condensation Polymerization kettle is used to carry out a condensation polymerization reaction under batch condition. Polymerization reaction can be acid catalyzed or self-catalyzed. The set-up can be used to measure the extent of reaction & also the reaction rate constant. The set-up consists of jacketed type SS reactor fitted with variable speed agitator & baffles. Reactor is fitted with Nichrome wire heaters and temperature is controlled by digital temperature controller. Metered quantity of nitrogen gas from a cylinder, allowed entering in the reactor. Set-up is complete & self-contained with sampling ports. The top cover can be removed for cleaning purpose. Feed is fed from top through a funnel provided with S.S. Ball Valve. An outlet is given to Condenser fitted with a PerkinÃ¢â¬â¢s triangle for collecting the condensate. Vapours are allowed to enter in the shell of condenser and cooling water is allowed to pass through the tube and condensate is collected.
ÃË To study the kinetics of Condensation Polymerization in a Batch Reactor under isothermal condition.
ÃË To calculate the rate constant and extent of reaction with and without acid catalyst.
Required for Operation:
ÃË Water supply
ÃË Floor Drain.
ÃË Electricity Supply: Single Phase, 220V AC, 50 Hz, 5-15 Amp. Combined socket with earth connection.
ÃË Floor Area : 1.5 x 1 m
ÃË Instruments, Laboratory wares and Chemicals required for analysis as per the system adopted.
ÃË High purity N2 gas cylinder with pressure regulator, end connection 1/4" BSP female.
ÃË A good quality painted rigid MS Structure is provided to support all the parts.
ÃË Condenser : 18 long 1., Concentric tube type
ÃË Reactor: Material Stainless Steel, Volume- 1 Ltrs. (Approx.)
ÃË Water Bath: Material Stainless Steel, Double wall, insulated with Ceramic Wool.
ÃË Heater: Nichrome wire Heater
ÃË Stirrer (2 Nos.): Stainless Steel Impeller and shaft coupled with FHP motor.
ÃË Stop Watch: Electronic
ÃË Temp. Sensor: RTD PT-100 type
ÃË The whole set-up is ingeniously designed and schematically arranged on a powder-coated rigid structure.
ÃË Digital Temp. Controller : 0-199.9Ã°C, RTD
ÃË PT-100 type(For Water Bath) cum-Indicator
ÃË With Standard make on/off switch, Mains Indicator fuses etc.
Scope of Delivery:
ÃË 1 Self-contained CONDENSATION POLYMERISATION SET UP Apparatus
ÃË 1 Instruction Manual consisting of experimental procedures, block diagram etc.
- FOB Port
- Payment Terms
- Cash Advance (CA), Cash in Advance (CID)
- Supply Ability
- 10 Per Month
- Delivery Time
- 30 Days
- Sample Available
- Sample Policy
- Sample costs shipping and taxes has to be paid by the buyer
- Packaging Details
- Material will be packed in safe carton
- Main Domestic Market
- All India
- ISO 9001 : 2015 certified